Possibilities of Use of Lean Engineering in the Russian Production
Abstract
Article contains the review of possibilities of using of lean engineering in the Russian production. In article the principles of lean, basic elements and stages of lean engineering, role of lean engineering in lean production and lean management are stated. The attention of the reader is focused on the basic rules of lean engineering and requirements for its implementation. The map of possibilities of practical using of lean engineering on the basis of criteria of QCDMS in the Russian production is developed.
Volltext:
PDF (Russian)Literaturhinweise
Anil Mital, Anoop Desai, Anand Subramanian, Aashi Mital. Product Development A Structured Approach to Consumer Product Development, Design and Manufacture. Butterworth-Heinemann. 2008; 448.
Ash Maurya. Running Lean. O’Reilly Media, Inc. 2012; 240.
Asprova Corporation [Internet] Available from: http://www.lean-manufacturing-japan.com/scm-terminology/ieor-industrial-engineering-operational-research.html
Bohdan W. Oppenheim. Lean for systems engineering with lean enablers for systems engineering. John Wiley & Sons, Inc. 2011; 336.
Christofer Corse, David Jonston, Martin Pritchard. A Dictionary of Construction, Surveying and Civil Engineering.. Oxford University Press. 2012; 497.
Jay Mandelbaum, Anthony Hermes, Donald Parker, Heather Williams. Value Engineering Synergies with Lean Six Sigma Combining Methodologies for Enhanced Results. CRC Press Taylor & Francis Group. 2012; 212.
Jean-Pierr Dal Pont (Ed.).Process Engineering and Industrial Management. Willey. 2012. - 492 p.
John G. Schmidt, David Lyle. Lean integration an integration factory approach to business agility. Addison-Wesley Professional. 2010; 464.
Oehmen,Josef,(Ed.) The Guide to Lean Enablers for Managing Engineering Programs, Version 1.0. Сambridge, MA: Joint MIT-PMI-INCOSE Community of Practice on Lean in Lean Program Management. 2012; 202. [Internet] Available from: http://hdl.handle.net/1721.1/70495.
Richard D. Crowson (Ed.). Product Design and Factory Development. The Hand Book of Manufacturing Engineering. СRC Press, Taylor & Francis Group, LLC. 2006; 419.
Richard Keegan. Becoming Lean: Practical Steps to Build Competitiveness. NuBooks. 2011; 42.
Stanley B. Gershwin. Manufacturing Systems Engineering. Prentice-Hall, Inc. 1993; 350.
Stefan Fränzle, Bernd Markert, and Simone Wünschmann. Introduction to Environmental Engineering.Wiley-VCH Verlag & Co. KGaA. 2012; 433.
Venkatesh VC, Sudin Izman. Precision Engineering. Tata McGraw-Hill Publishing Company Limited. 2008; 418.